Manufactur standard Spiral Wound Gasket-RIR for South Africa Importers
Manufactur standard Spiral Wound Gasket-RIR for South Africa Importers Detail:
Spiral wound gasket consists of “V-shape”(or”W-shape”)metal tape and nonmetal tape, which are overlapped each other and wound continuously.To fasten the metal tape,both its start point and end point are tack welded.
Feature
Wide Scope of acceptable working conditions. Can be used under high temperature, high pressure and ultra-low temperature or vacuum conditions. Change the combination of the gasket materials is to tackle the chemical corrosion problem of diverse media toward the gasket.
Not very rigid requirements to the surface precision of the flange. May be used to seal flanges with rough surface
Easy installation and handy use.
Excellent Sealability
Products Type
Technical Data Sheet
|
Product&Type |
Size（mm） |
Temperature(℃) |
Pressure（Mpa） |
|
Spiral Wound Gasket filled with Graphite
|
φ16~φ3200 |
(In Oxidizing Environment )-240~+550℃；(In non-Oxidizing Environment)-240~+870℃ |
(Under hot water, oil etc. )30 Mpa; (Under vapor oil, gases etc.)20 Mpa |
|
Spiral Wound Gasket filled with Asbestos
|
φ16~φ3200 |
-150~+450℃ |
15 |
|
Spiral Wound Gasket filled with PTFE
|
φ16~φ3200 |
-200~+250℃ |
15 |
Application Area
The Spiral Wound Gaskets are mainly used in valves &pipes, pressure vessel, condenser, heat exchanger flanges in oil, chemical, metallurgy, vessel and mechanical industries.
Product detail pictures:
Related Product Guide:
Comparison of O-Ring Materials
What Is A PTFE Ring Gasket?
Manufactur standard Spiral Wound Gasket-RIR for South Africa Importers, The product will supply to all over the world, such as: , , ,
This video shows you how to adjust a HuMa R-10 regulator and how to service it.
Please ensure the regulator has been removed from the rifle before stripping it!
The O rings are:
Small piston O ring – 1.5mm cross section x 5.5mm internal diameter nitrile 70 shore (N70),
Large piston O ring – 1.5mm cross section x 12.5mm internal diameter nitrile 70 shore (N70)
Main body O ring – 2mm cross section x 12mm internal diameter nitrile 70 shore (N70),
Small body O ring – 1.5mm cross section x 9mm internal diameter nitrile 70 shore (N70)
Cap O ring – 1.5mm cross section x 17mm internal diameter nitrile 70 shore (N70),
To purchase a HuMa regulator please visit the eShop on www.xtxair.com
By from -
By from -
