OEM/ODM Supplier for Expanded PTFE Tape for Stuttgart Factory
OEM/ODM Supplier for Expanded PTFE Tape for Stuttgart Factory Detail:
Expanded PTFE sealant tape possesses all the properties of PTFE, resistant to all the corrosive media.
Soft, twistable and bendable at will. Even if gravely rusted and worn out sealing face, as long as it is used, the equipment units may continue their service and the sealing can keep its best performance.
Excellent anti-wriggle variation ability and cold current resistance. Even in case of cross change of temperature and pressure, good sealing can be assured.
l Easy use and replacement
l Wide service scope.
Technical Data Sheet
No.
|
Project |
Technical Indexes |
1 |
PH Range |
0-14 |
2 |
Density |
0.7-0.8g/cm3 |
3 |
Temperature resistance |
-260-+260℃ |
4 |
High pressure resistance |
20~25Mpa |
5 |
Elongation |
20~30% |
6 |
Tensile strength |
30~35Mpa |
Regular Size
NO. |
SIZE |
NO. |
SIZE |
1 |
3mm*1.5mm*30m |
15 |
16mm*4mm*10m |
2 |
3mm*2mm*30m |
16 |
20mm*3mm*5m |
3 |
6mm*3mm*20m |
17 |
20mm*4mm*5m |
4 |
7mm*2.5mm*20m |
18 |
20mm*5mm*5m |
5 |
9mm*3mm*15m |
19 |
20mm*7mm*5m |
6 |
9mm*4mm*15m |
20 |
25mm*4mm*5m |
7 |
10mm*3mm*10m |
21 |
25mm*5mm*5m |
8 |
10mm*4mm*10m |
22 |
25mm*8mm*5m |
9 |
10mm*5mm*10m |
23 |
25mm*10mm*5m |
10 |
12mm*3mm*10m |
24 |
30mm*3mm*5m |
11 |
12mm*4mm*10m |
25 |
30mm*4mm*5m |
12 |
12mm*5mm*10m |
26 |
40mm*4mm*5m |
13 |
12mm*6mm*10m |
27 |
50mm*4mm*5m |
14 |
14mm*5mm*10m |
28 |
100mm*0.5mm*10m |
Application Area
It can be widely used in diverse pipelines to seal flanges, enameled products, glass, rubber products, plastics, non-rusting graphite lining tower, heat exchanger, pressure container as linings and to seal their flanges, to seal the fillers of diverse pumps and valves and to seal much heavy-calibre flanges which are not so precise, have larger unflat area and irregular shapes and require not too large tighting force.
Product detail pictures:
Related Product Guide:
Comparison of O-Ring Materials
O-Ring Sizes for Industrial Applications
OEM/ODM Supplier for Expanded PTFE Tape for Stuttgart Factory, The product will supply to all over the world, such as: , , ,
Shifts much better with 10W30 installed.
As usual it’s difficult to get oil back into the manual transmission without a proper pump. Jeep design makes it handy to just pour oil in with a longer hose while standing beside front fender.
Used a 90 degree fitting from Lowes that has a garden hose male to a small ~1/2″ male end. Seals into the garden hose female. Just pour in until oil starts dripping into catch pan below Jeep, re-install plug. Careful not to over tighten plug, just needs to be snug, the plug doesn’t fasten anything..
By from -
By from -