Quality Inspection for Carbon Fiber Packing Impregnated with PTFE to Melbourne Factory

Short Description:

Diagonal braided to form a dense but pliable packing, each carbon fiber is pre-impregnated with PTFE, and re-impregnated during square braided. It is premium service packing for media of weak chemical corrosion and grains of particles exit. Technical Data Sheet   Rotating Reciprocating Valves Pressure 3Mpa 10Mpa 25Mpa Shaft Speed 15m/s rotary Temperature -200℃~+280℃ PH Range 2~12  Application Area Resist all the strong corrosive media and media with a...


Product Detail

Product Tags

Related Video

Feedback (2)

, , ,
Quality Inspection for Carbon Fiber Packing Impregnated with PTFE to Melbourne Factory Detail:

Diagonal braided to form a dense but pliable packing, each carbon fiber is pre-impregnated with PTFE, and re-impregnated during square braided. It is premium service packing for media of weak chemical corrosion and grains of particles exit.

Technical Data Sheet

 

Rotating

Reciprocating

Valves

Pressure

3Mpa

10Mpa

25Mpa

Shaft Speed

15m/s rotary

Temperature

-200℃~+280℃

PH Range

2~12

 Application Area

Resist all the strong corrosive media and media with a few crystal particles with the exception of the strong oxidizing agent polonium, chiefly used for the sealing of the centrifugal pump, column pump, mixer and valves.


Product detail pictures:

Quality Inspection for
 Carbon Fiber Packing Impregnated with PTFE to Melbourne Factory detail pictures


Related Product Guide:
Useful Tips For Installing The Teflon Envelope Gasket
Comparison of O-Ring Materials

Quality Inspection for Carbon Fiber Packing Impregnated with PTFE to Melbourne Factory, The product will supply to all over the world, such as: , , ,


  • Leaking pipes due to galvanic corrosion is a very common phenomenon on almost every vessel.

    Repairs with Wencon Pipe Tape require no tools. Besides the pipe bandage the package also contains protective gloves and plastic bags for water. If the pipe can not be emptied or when high pressure repairs are required, Wencon Putty can be used to stop the leakage and reinforce the repair.

    Facts about Wencon Pipe Tape:

    Wencon Pipe Tape is a fast curing pipe repair bandage especially formulated to make quick and effective repairs of cracks, leaks, fractures, and corrosion porosity in piping carrying water, oil, steam, most gases and even solvents. Wencon Pipe Tape has good pressure, temperature and chemical resistance.

    Wencon Pipe Tape is a pre impregnated fibreglass bandage ready for use after soaking in water for 10 seconds. After 10 minutes cure the bandage hardens and the pipe can usually be reactivated. The bandage is fully cured within 1 hour.

    Facts:
    - The instant repair bandage for leaking pipes
    - Quick and effective to use
    - No mixing No tools
    - Water activated
    - Ready for use in 10 seconds Cures in 10 minutes
    - Suitable for all pipes and surfaces

    For more information – visit www.wencon.com.

    Thanks to www.danosongs.com for the backgorund music!


    5 Stars By from -

    5 Stars By from -

    Related Products