Factory source manufacturing Carbon Fiber Packing Impregnated with PTFE to United Kingdom Importers
Factory source manufacturing Carbon Fiber Packing Impregnated with PTFE to United Kingdom Importers Detail:
Diagonal braided to form a dense but pliable packing, each carbon fiber is pre-impregnated with PTFE, and re-impregnated during square braided. It is premium service packing for media of weak chemical corrosion and grains of particles exit.
Technical Data Sheet
|
|
Rotating |
Reciprocating |
Valves |
|
Pressure |
3Mpa |
10Mpa |
25Mpa |
|
Shaft Speed |
15m/s rotary |
||
|
Temperature |
-200℃~+280℃ |
||
|
PH Range |
2~12 |
||
Application Area
Resist all the strong corrosive media and media with a few crystal particles with the exception of the strong oxidizing agent polonium, chiefly used for the sealing of the centrifugal pump, column pump, mixer and valves.
Product detail pictures:
Related Product Guide:
A Look at the Molded Gasket
What Is A PTFE Ring Gasket?
Factory source manufacturing Carbon Fiber Packing Impregnated with PTFE to United Kingdom Importers, The product will supply to all over the world, such as: , , ,
Just a simple fix I came up with the end the factory built in leak on the drive side of a 4 speed transmission.
Thanks to TBear for the T shirt.
Here’s the link to the drawing in .pdf format. Its not to scale but its pretty straight forward.
https://www.celticthunder.net/TransSeal.pdf
Here’s the O-rings I got from McMaster Carr.
https://www.mcmaster.com/#9464k291/=eaxx08
saddlebagrail from Shovelhead.us is now selling these on eBay.
They are $53 and well worth it.
https://www.ebay.com/usr/saddlebagrail?_trksid=p2047675.l2559
The story of this build,
https://www.celticthunder.net
By from -
By from -
