Factory Supplier for Arcylic Fiber Braided Packing Export to Melbourne
Factory Supplier for Arcylic Fiber Braided Packing Export to Melbourne Detail:
Arcylic fiber packing braided from high strength arcylic fiber with PTFE impregnated twice time. It has excellent properties of sealing, lubricating and resistant to chemical. The arcylic packing can be with or without oil. High elastic red silicone rubber core can absorb vibration.
Technical Data Sheet
|
Rotating |
Reciprocating |
Valves |
Pressure |
2Mpa |
10Mpa |
20Mpa |
Shaft Speed |
20m/s rotary |
||
Temperature |
-100℃~+280℃ |
||
PH Range |
2~12 |
Application Area
Usually used in pumps and valves, and can handle more chemicals except strong acid, strong alkali and strong oxidizer.
Product detail pictures:
Related Product Guide:
Comparison of O-Ring Materials
What Is A PTFE Ring Gasket?
Factory Supplier for Arcylic Fiber Braided Packing Export to Melbourne, The product will supply to all over the world, such as: , , ,
TERM Sealant Barrier – Termite barrier for plumbing penetrations
www.PolyguardBarriers.com
TERM Sealant Barrier is a sealant barrier, applied with a caulking gun or smoothing tool, and used for both waterproofing and insect
exclusion . TERM Sealant Barrier is a component of the non-structural TERM Barrier System which, when properly constructed as part of the building envelope, acts as a barrier to almost all pests. Because almost all pests are excluded for the life of the structure, the need for pesticide treatment should be permanently and drastically reduced.
Here are some of the places where it is used:
1. To seal slab penetrations above slab against termite entry
2. As a component of the TERM Full Bath Trap Barrier, to exclude
termites, fire ants, rodents, moles, etc. from entry underneath
bathtubs at ground level
3. To seal slab penetrations (prior to concrete pour) as a
component of the TERM Underslab Barrier
4. To detail small gaps found during construction in horizontal or
vertical portions of the TERM building envelope pest barrier.
Polyguard Products, Barrier Products Division
The Polyguard Particle Barrier is an insect exclusion product and is easy to install. Used around the perimeter of the building, it can significantly reduce the quantity of termiticides needed to protect the structure.
Polyguard has registered our barrier products with the EPA, who
along with state agencies regulates pesticides. However, Polyguard’s barriers are classified by the EPA as “devices”, since they contain no toxic components.
Termites trying to get into a structure are unable to penetrate the
Polyguard Particle Barrier. Also important, in the case of the
Reticuletermes flavipes species, is that the insects are unable to get out of a structure which they previously penetrated. In the majority of infested structures, there is not sufficient moisture in the building for Reticuletermes flavipes, so they have to come out to obtain moisture.
By from -
By from -