Hot Sale for PTFE Packing with Aramid Corner Supply to Berlin
Hot Sale for PTFE Packing with Aramid Corner Supply to Berlin Detail:
PTFE packing with aramid corner is made from aramid yarns impregnated with PTFE, while the friction faces are made of PTFE yarns. This structure enhances the lubrication ability of aramid fiber and improves the strength of the pure PTFE.
Technical Data Sheet
|
|
Rotating |
Reciprocating |
Valves |
|
Pressure |
4Mpa |
15Mpa |
25Mpa |
|
Shaft Speed |
22m/s rotary |
||
|
Temperature |
-100℃~+280℃ |
||
|
PH Range |
2~12 |
||
Application Area
It affords longer service life under severe conditions which conventional asbestos packing can bot provide satisfaction, such as mine, tin ore, paper pulp, feed water pump of power stations, etc.
Product detail pictures:
Related Product Guide:
Comparison of O-Ring Materials
O-Ring Sizes for Industrial Applications
Hot Sale for PTFE Packing with Aramid Corner Supply to Berlin, The product will supply to all over the world, such as: , , ,
Toolwright 3 is an extruded fluoropolymer film coated with silicone pressure sensitive adhesive. Toolwright 3 has a thinner film than Toolwright 5 version and can be more easily applied over complex contour surfaces. Toolwright 3 has high elongation, good tear strength, high temperature resistance and excellent clean up after removal. Note: The color has changed to orange.
Benefits:
• Extend the life of worn tools avoiding cost of new tools.
• Tougher film is more tear resistant, easier and faster to apply.
• Improved part surface quality.
For more information, please visit: www.airtechonline.com
By from -
By from -
