10 Years Manufacturer Aramid Fiber Braided Packing with PTFE Impregnated to Johor Importers
10 Years Manufacturer Aramid Fiber Braided Packing with PTFE Impregnated to Johor Importers Detail:
Aramid fiber PTFE packing is braided from high quality Dupont aramid fiber with PTFE impregnated and lubricant additive. This packing can bear higher pressure applications than other types of braided packing. Due to its steel like strength, this yearn can used separately or as back up rings with other types of packing. This packing has been developed to replace asbestos packing for pump systems. It covers all the service ranges which asbestos packing provides and even much better.
Technical Data Sheet
|
|
Rotating |
Reciprocating |
Valves |
|
Pressure |
8Mpa |
20Mpa |
30Mpa |
|
Shaft Speed |
20m/s rotary |
||
|
Temperature |
-100℃~+280℃ |
||
|
PH Range |
2~12 |
||
Application Area
It affords longer service life under severe conditions which conventional asbestos packing can bot provide satisfaction, such as mine, tin ore, paper pulp, feed water pump of power stations, etc.
Product detail pictures:
Related Product Guide:
Comparison of O-Ring Materials
What Is A PTFE Ring Gasket?
10 Years Manufacturer Aramid Fiber Braided Packing with PTFE Impregnated to Johor Importers, The product will supply to all over the world, such as: , , ,
This video shows you how to adjust a HuMa R-10 regulator and how to service it.
Please ensure the regulator has been removed from the rifle before stripping it!
The O rings are:
Small piston O ring – 1.5mm cross section x 5.5mm internal diameter nitrile 70 shore (N70),
Large piston O ring – 1.5mm cross section x 12.5mm internal diameter nitrile 70 shore (N70)
Main body O ring – 2mm cross section x 12mm internal diameter nitrile 70 shore (N70),
Small body O ring – 1.5mm cross section x 9mm internal diameter nitrile 70 shore (N70)
Cap O ring – 1.5mm cross section x 17mm internal diameter nitrile 70 shore (N70),
To purchase a HuMa regulator please visit the eShop on www.xtxair.com
By from -
By from -
