OEM Customized wholesale Carbon Fiber Packing Impregnated with PTFE to Mauritius Importers
OEM Customized wholesale Carbon Fiber Packing Impregnated with PTFE to Mauritius Importers Detail:
Diagonal braided to form a dense but pliable packing, each carbon fiber is pre-impregnated with PTFE, and re-impregnated during square braided. It is premium service packing for media of weak chemical corrosion and grains of particles exit.
Technical Data Sheet
|
Rotating |
Reciprocating |
Valves |
Pressure |
3Mpa |
10Mpa |
25Mpa |
Shaft Speed |
15m/s rotary |
||
Temperature |
-200℃~+280℃ |
||
PH Range |
2~12 |
Application Area
Resist all the strong corrosive media and media with a few crystal particles with the exception of the strong oxidizing agent polonium, chiefly used for the sealing of the centrifugal pump, column pump, mixer and valves.
Product detail pictures:
Related Product Guide:
Comparison of O-Ring Materials
O-Ring Sizes for Industrial Applications
OEM Customized wholesale Carbon Fiber Packing Impregnated with PTFE to Mauritius Importers, The product will supply to all over the world, such as: , , ,
If the sliding door on your van is hard to open and close, or if it feels like the door of your van is stuck when you open and close it, you can fix the stuck door by oiling the rollers. The van in the video is a GMC Safari, which is the same as the Chevrolet Astro Van. Most minivans use a similar system.
To fix your van door and make it open smoothly, get some spray oil, like Tri-Flow and spray oil on all the rollers, top, middle, and bottom. Once the rollers on the stuck van door are oiled, the door will open smoothly.
Sam Maltese shows how to thread a 1/2 ridge pipe using a hand threader
By from -
By from -