2017 China New Design NBR O-Ring Wholesale to Algeria
2017 China New Design NBR O-Ring Wholesale to Algeria Detail:
Nitrile rubber (NBR, Buna-N) provides excellent resistance to petroleum oils as well as mineral and vegetable oil. Nitrile rubber also offers strong resistance to heat aging – often a key advantage over natural rubber.
Technical Data Sheet
| Color | Black or Color |
| Material | Nitrile(NBR) |
| Hardness(Shore A) | 65~75 |
| Temperature(℃） | -30~+120 |
| Tensile Strength(Mpa) | 14 |
| Elongation at Break(%) | 384 |
| Density(g/cm3) | 1.2 |
Application Area
Nitrile rubber performs well in carburetor and fuel pump diaphragms, aircraft hoses, seals and gaskets as well as oil-lined tubing. Due to its versatility, nitrile is used in applications involving not only oil and fuel resistance, but those applications requiring resistance to heat, abrasion, water, and gas permeability.
Product detail pictures:
Related Product Guide:
What Is A PTFE Ring Gasket?
O-Ring Sizes for Industrial Applications
2017 China New Design NBR O-Ring Wholesale to Algeria, The product will supply to all over the world, such as: , , ,
https://www.optibelt.com/en/material-handling.html
Service case PREMIUM for welding optibelt RR, RR Plus and KK
This five-piece service case PREMIUM is suitable for daily use. With its ergonomic and temperature regulated EErgo welding tool, TPE and urethane belts can be welded quite easily at the press of a button. Due to the short warm-up phase, of less than two minutes, the tool is optimised for instant use.
The versatile FZ01 Vario clamps are a perfect complement to the other tools in the welding set. The quick clamping function allows round belts with diameters up to 10 mm and V-belts up to profile 10 to be clamped and welded within a short space of time.
The exchangeable profile jaws also make it possible to process special profiles. The service case PREMIUM also includes a second set of guiding clamps, which are used for round belts with diameters from 8 mm upwards and V-belts with profiles of up to 32.
The set is completed by a pair of shears with an adjustable angled stop that allows both straight and angled cuts, and a side cutter for removing welded seams.
Contents of the service box
GUIDING CLAMPS FZ02/3
for round belts with diameters from 8 mm and V-belt profiles up to 32 (D)
GUIDING CLAMPS FZ01 VARIO
with exchangeable profile jaws, for round belts with diameters of up to 10 mm and V-belt profiles up to 10 (Z)
SHEARS AS04
with adjustable angled stop
WELDING TOOL EERGO
for TPE and PU; under 2 minutes warmup time; temperature regulated welding tool, ergonomic and quick
SIDE CUTTER SE02
for removing the weld seam
By from -
By from -
