Low MOQ for PTFE Filament Braided Packing for Manufacturers
Low MOQ for PTFE Filament Braided Packing for Manufacturers Detail:
PTFE filament packing is braided from pure PTFE filament yarn and impregnated with PTFE dispersion, it has the better internal structure, higher cross-sectional density and structural strength than traditional PTFE packing.
Technical Data Sheet
|
|
Rotating |
Reciprocating |
Valves |
|
Pressure |
3Mpa |
15Mpa |
25Mpa |
|
Shaft Speed |
12m/s rotary |
||
|
Temperature |
-200℃~+280℃ |
||
|
PH Range |
0~14 |
||
Application Area
Rotary and reciprocating plant in the food processing, pharmaceutical, special chemicals, and pulp and paper sectors.
Product detail pictures:
Related Product Guide:
A Look at the Molded Gasket
Comparison of O-Ring Materials
Low MOQ for PTFE Filament Braided Packing for Manufacturers, The product will supply to all over the world, such as: , , ,
How to rebuild the front windshield hydraulic latch cylinders on a Mercedes R129..W124 models rear latch and more recent clk are very similar..The seal kit was from Konstantin Belov at MBseals https://www.mbseals.com/
He was really good to deal with and shipped very quickly..he uses an upgraded seal that will resist the leakage problems the original seals have..The latch cylinders are very easy to do yourself,unlike the main cylinders which would be better left to a professional rebuilder…I can not stress enough that you purchase the correct hydraulic fluid from a Mercedes dealership when topping up the fluid. follow me on twitter https://twitter.com/fupabox
By from -
By from -
