China supplier OEM PTFE Graphite Packing with Aramid Corner to San Francisco Manufacturers
China supplier OEM PTFE Graphite Packing with Aramid Corner to San Francisco Manufacturers Detail:
PTFE graphite packing with aramid corner is made from aramid yarns impregnated with PTFE, while the friction faces are made of graphite PTFE yarns. The graphite particle in PTFE yarn enhances the heat exchange efficiency.
Technical Data Sheet
|
|
Rotating |
Reciprocating |
Valves |
|
Pressure |
4Mpa |
15Mpa |
25Mpa |
|
Shaft Speed |
20m/s rotary |
||
|
Temperature |
-200℃~+280℃ |
||
|
PH Range |
2~12 |
||
Application Area
It affords longer service life under severe conditions which conventional asbestos packing can bot provide satisfaction, such as mine, tin ore, paper pulp, feed water pump of power stations, etc.
Product detail pictures:
Related Product Guide:
What Is A PTFE Ring Gasket?
Comparison of O-Ring Materials
China supplier OEM PTFE Graphite Packing with Aramid Corner to San Francisco Manufacturers, The product will supply to all over the world, such as: , , ,
3M glass cloth tapes have a silicone adhesive and are used in many graphics applications requiring high temperature performance and high abrasion resistance. Commonly referred to as “glass tape” or “cloth tape,” it has an ultra low friction face that vehicle wrappers commonly use to line the leading edge of their plastic squeegees to cut down drag, or pull on the vinyl. The result is similar to using a Teflon hard card or hard plastic squeegee.
By from -
By from -
