China supplier OEM Spiral Wound Gasket-CG for Miami Factories
China supplier OEM Spiral Wound Gasket-CG for Miami Factories Detail:
Spiral wound gasket consists of “V-shape”(or”W-shape”)metal tape and nonmetal tape, which are overlapped each other and wound continuously.To fasten the metal tape,both its start point and end point are tack welded.
Feature
Wide Scope of acceptable working conditions. Can be used under high temperature, high pressure and ultra-low temperature or vacuum conditions. Change the combination of the gasket materials is to tackle the chemical corrosion problem of diverse media toward the gasket.
Not very rigid requirements to the surface precision of the flange. May be used to seal flanges with rough surface
Easy installation and handy use.
Excellent Sealability
Products Type
Technical Data Sheet
|
Product&Type |
Size（mm） |
Temperature(℃) |
Pressure（Mpa） |
|
Spiral Wound Gasket filled with Graphite
|
φ16~φ3200 |
(In Oxidizing Environment )-240~+550℃；(In non-Oxidizing Environment)-240~+870℃ |
(Under hot water, oil etc. )30 Mpa; (Under vapor oil, gases etc.)20 Mpa |
|
Spiral Wound Gasket filled with Asbestos
|
φ16~φ3200 |
-150~+450℃ |
15 |
|
Spiral Wound Gasket filled with Asbestos
|
φ16~φ3200 |
-150~+450℃ |
15 |
|
Spiral Wound Gasket filled with PTFE
|
φ16~φ3200 |
-200~+250℃ |
15 |
Application Area
The Spiral Wound Gaskets are mainly used in valves &pipes, pressure vessel, condenser, heat exchanger flanges in oil, chemical, metallurgy, vessel and mechanical industries.
Product detail pictures:
Related Product Guide:
A Look at the Molded Gasket
What Is A PTFE Ring Gasket?
China supplier OEM Spiral Wound Gasket-CG for Miami Factories, The product will supply to all over the world, such as: , , ,
Weighing grated cheese using teflon coated Ishida multihead weigher. For more information visit https://www.ishidaeurope.com.
Spoločnosť je jediný výrobca tkaninových kompenzátorov na Slovensku. Okrem toho dodáva na slovenský a svetový trh gumené a kovové kompenzátory, potrubné závesy a podpery, PTFE klzné ložiská a iné prvky potrubných systémov.
Kompaflex – D.M.M. potrubné elementy spol. s r.o. is the only manufacturer of fabric expansion joints in Slovakia.
The field of application of our products contains all situations where there is to absorb, compensate and transfer the motions of pipelines.
By from -
By from -
