Good Quality for Spiral Wound Gasket-R to Kenya Manufacturers
Good Quality for Spiral Wound Gasket-R to Kenya Manufacturers Detail:
Spiral wound gasket consists of “V-shape”(or”W-shape”)metal tape and nonmetal tape, which are overlapped each other and wound continuously.To fasten the metal tape,both its start point and end point are tack welded.
Feature
Wide Scope of acceptable working conditions. Can be used under high temperature, high pressure and ultra-low temperature or vacuum conditions. Change the combination of the gasket materials is to tackle the chemical corrosion problem of diverse media toward the gasket.
Not very rigid requirements to the surface precision of the flange. May be used to seal flanges with rough surface
Easy installation and handy use.
Excellent Sealability
Products Type
echnical Data Sheet
|
Product&Type |
Size（mm） |
Temperature(℃) |
Pressure（Mpa） |
|
Spiral Wound Gasket filled with Graphite
|
φ16~φ3200 |
(In Oxidizing Environment )-240~+550℃；(In non-Oxidizing Environment)-240~+870℃ |
(Under hot water, oil etc. )30 Mpa; (Under vapor oil, gases etc.)20 Mpa |
|
Spiral Wound Gasket filled with Asbestos
|
φ16~φ3200 |
-150~+450℃ |
15 |
|
Spiral Wound Gasket filled with PTFE
|
φ16~φ3200 |
-200~+250℃ |
15 |
Application Area
The Spiral Wound Gaskets are mainly used in valves &pipes, pressure vessel, condenser, heat exchanger flanges in oil, chemical, metallurgy, vessel and mechanical industries.
Product detail pictures:
Related Product Guide:
A Look at the Molded Gasket
Comparison of O-Ring Materials
Good Quality for Spiral Wound Gasket-R to Kenya Manufacturers, The product will supply to all over the world, such as: , , ,
Visit https://www.smartplumbingproducts.com/product/insta-clamp-repair-clamp to learn more.
The Insta-Clamp Repair Clamp provides a quick and easy way to temporarily patch a leaky pipe. Available in 2 sizes, the clamp prevents having to drain the system and eliminates shutdown. Insta-Clamp provides quick seal on all M, L or K copper tubing solder joints and can make a permanent or temporary repair on 45s, 90s, Tees, Couplings and Threaded Adapters. The 60% pipe side of the waffle gasket can also be used for pin hole leaks.
Features and Benefits:
Available in .5″ to 2.5″ and 3″ – 4″ diameters (Insta-Clamp Plus)
Made from 304 Stainless Steel
Unique NBR STEP waffle gasket design
Temp rating: -40o to 2120 F
Pressure Rating: Insta-Clamp ½”-2-1/2″ – 150 psi
Pressure Reating: Insta-Clamp Plus 3.00″-4.00″ – 175 psi
Exact Fit – Simple two piece design
For permanent or temporary repairs
Produced in the USA
By from -
By from -
